SSD P4800X SERIES 1.5TB PCIEX4/1/2HEIGHT 20NM 3DXPOINT SINGLE

Cod Produs: ILSSDPED1K015TA01 Categorie: Solid State Drives (SSD)

Enhanced Power Loss Data Protection Enhanced Power Loss Data Protection prepares the SSD for unexpected system power loss by minimizing data in transition in temporary buffers, and uses on-board power-loss protection capacitance to provide enough energy for the SSD firmware to move data from the transfer buffer and other temporary buffers to the NAND, thus protecting system and user data. Hardware Encryption Hardware encryption is data encryption done at the drive level. This is used to ensure that the data stored on the drive is secured from unwanted intrusion. High Endurance Technology (HET) High Endurance Technology (HET) in SSD's combines Intel® NAND Flash Memory silicon enhancements and SSD system management techniques to help extend the endurance of the SSD. Endurance is defined as the amount of data that can be written to an SSD during its lifetime. Temperature Monitoring and Logging Temperature Monitoring and Logging uses an internal temperature sensor to monitor and log airflow and device internal temperature. The logged results can be accessed using the SMART command. End-to-End Data Protection End-to-End Data Protection ensures integrity of stored data from the computer to the SSD and back.

Additional information

Component for	Server/Workstation
Product series	IntelÂ® Optaneâ„¢ SSD DC P4800X Series
Write speed	2200 MB/s
NVMe	Y
Operating / non-operating shock	50G, 170 in/s, trapezoidal
SSD form factor	Half-Height/Half-Length (HH/HL)
Interface	PCI Express 3.0
Operating shock	50 G
SSD ARK ID	97159
Random read (100% span)	550000 IOPS
Random write (100% span)	550000 IOPS
SSD temperature monitoring	Y
Memory type	3D XPoint
Read speed	2500 MB/s
Read latency	10 Âµs
Processor family	Intel Optane DC SSD
Write latency	10 Âµs
Market segment	Server
Security algorithms	256-bit AES
SSD capacity	1500 GB
Hardware encryption	Y
Non-operating vibration	3.13 G
Status	Launched
Power consumption (idle)	7 W
SSD endurance rating	164 PBW
Product family	Data center SSD
Sequential writing speed	2200 MB/s
Sequential reading	2500 MB/s
SSD shock	50G, 170 in/s, trapezoidal
Harmonized System (HS) code	84717070
SSD power consumption (idle)	7
End-to-End Data Protection	Y
IntelÂ® Rapid Start Technology	N
Power consumption (active)	18 W
Product codename	Cold Stream
Non-operating shock	50 G
Maximum operating temperature	70 Â°C
Drive capacity	1500 GB
Operating temperature (T-T)	0 – 70 Â°C
SSD power consumption (active)	18
Last change	63903513
Power consumption (write)	18 W
IntelÂ® Remote Secure Erase	N
Power consumption (read)	18 W
SSD hardware encryption	AES 256 bit
Product brief URL	https://www.intel.com/content/www/us/en/solid-state-drives/optane-ssd-dc-p4800x-brief.html
Launch date	Q3'18
Target market	Artificial Intelligence, Cloud Computing, High Performance Computing

Enhanced Power Loss Data Protection

Enhanced Power Loss Data Protection prepares the SSD for unexpected system power loss by minimizing data in transition in temporary buffers, and uses on-board power-loss protection capacitance to provide enough energy for the SSD firmware to move data from the transfer buffer and other temporary buffers to the NAND, thus protecting system and user data.

Hardware Encryption

Hardware encryption is data encryption done at the drive level. This is used to ensure that the data stored on the drive is secured from unwanted intrusion.

High Endurance Technology (HET)

High Endurance Technology (HET) in SSD’s combines Intel® NAND Flash Memory silicon enhancements and SSD system management techniques to help extend the endurance of the SSD. Endurance is defined as the amount of data that can be written to an SSD during its lifetime.

Temperature Monitoring and Logging

Temperature Monitoring and Logging uses an internal temperature sensor to monitor and log airflow and device internal temperature. The logged results can be accessed using the SMART command.

End-to-End Data Protection

End-to-End Data Protection ensures integrity of stored data from the computer to the SSD and back.