I-TEC USB-C HDMI+2X DP CHARGER/I-TEC DOCK PD 100WCHARGER 112W

Cod Produs: I7C31TRI4KDPDPRO100 Categorie: Port Replicators & Docking Stations

A high-performance USB-C office dock that supports up to 3x external 4K monitors. The dock is compatible with any laptop equipped with a USB-C, USB4 or Thunderbolt 3/4 port. Of course, it supports charging of your laptop or tablet, up to 100 W. The integrated latest DP 1.4 DSC protocol also supports 5K/60 Hz resolution, which can be appreciated by professional graphic designers, data analysts, film editors or high-definition video lovers. The dock can be purchased in two variants: 1. without the included USB-C charging adapter (product code C31TRIPLE4KDOCKPDPRO) 2. with the included 100W adapter (this variant) Note: macOS operating system does not support Multi Stream Transport (MST) video transfer technology, which means that if connected to macOS, the same image will be projected on both connected monitors. - Connect up to three external 4K/30Hz monitors - Refresh rate up to 360Hz (when connected to a single 1080p monitor) - Power delivery: up to 100W - 1x HDMI, 2x DisplayPort++ - 3x USB 3.1, 1x USB-C 3.2 Gen2 (10 Gbps) and 2x USB 2.0 allow you to easily connect your USB devices and peripherals. Gigabit Ethernet RJ-45 provides a reliable, robust and high-speed - Internet connection with 10/100/1000 Mbps support - Combination audio and microphone jack on the front panel - Kensington lock provides anti-theft protection, especially in shared office environments or public areas - Docking station power switch allows for maximum power savings - Docking station supports a VESA mount for smart vertical installation behind a VESA-enabled monitor - Supports Windows 10, macOS, Android, iPadOS, ChromeOS and Linux The dock can be used without a power adapter connected. In this case, the video outputs, LAN (RJ-45), audio/mic and both USB 2.0 ports will always be functional. However, the USB 3.0 ports and the USB-C data port may not work when connecting devices with higher power requirements (e.g. SSDs, especially NVMe drives). In this case, the docking station may shut down. We recommend using the docking station with a power adapter connected to ensure that all ports are used and that maximum data transfer speeds are achieved. (The adapter is included in the package). Note: If connected to an Android device, the dock will only work with the power adapter connected. (Adapter included).

Additional information

Host interface	USB 3.2 Gen 1 (3.1 Gen 1) Type-C
Ethernet LAN (RJ-45) ports	1
LED indicators	Y
Product colour	Black
Card reader integrated	N
Ethernet LAN	Y
Ethernet LAN data rates	10,100,1000 Mbit/s
HDMI ports quantity	1
DisplayPort version	1.4
Data transfer rate	10 Gbit/s
Connectivity technology	Wired
USB Power Delivery up to	100 W
USB Power Delivery	Y
USB 2.0 ports quantity	2
Combo headphone/mic port	Y
Cable lock slot	Y
Number of displays supported	3
DisplayPorts quantity	2
Width	113 mm
On/off switch	Y
Output voltage	5/9/12/19/20 V
USB cable length	1 m
Compatible power plug types	EU
Power supply	100 W
AC input voltage	100 – 240 V
AC input frequency	50 – 60 Hz
Input current	2.3 A
Output current	5:00 AM
Operating temperature (T-T)	0 – 40 Â°C
Power source type	AC
Maximum refresh rate	144 Hz
Cable lock slot type	Kensington
Height	31.2 mm
Weight	340 g
Depth	113 mm
Manual	Y
AC adapter included	Y

The integrated latest DP 1.4 DSC protocol also supports 5K/60 Hz resolution, which can be appreciated by professional graphic designers, data analysts, film editors or high-definition video lovers.

The dock can be purchased in two variants:

1. without the included USB-C charging adapter (product code C31TRIPLE4KDOCKPDPRO)
2. with the included 100W adapter (this variant)
Note: macOS operating system does not support Multi Stream Transport (MST) video transfer technology, which means that if connected to macOS, the same image will be projected on both connected monitors.

– Connect up to three external 4K/30Hz monitors
– Refresh rate up to 360Hz (when connected to a single 1080p monitor)
– Power delivery: up to 100W
– 1x HDMI, 2x DisplayPort++
– 3x USB 3.1, 1x USB-C 3.2 Gen2 (10 Gbps) and 2x USB 2.0 allow you to easily connect your USB devices and peripherals. Gigabit Ethernet RJ-45 provides a reliable, robust and high-speed
– Internet connection with 10/100/1000 Mbps support
– Combination audio and microphone jack on the front panel
– Kensington lock provides anti-theft protection, especially in shared office environments or public areas
– Docking station power switch allows for maximum power savings
– Docking station supports a VESA mount for smart vertical installation behind a VESA-enabled monitor
– Supports Windows 10, macOS, Android, iPadOS, ChromeOS and Linux

The dock can be used without a power adapter connected. In this case, the video outputs, LAN (RJ-45), audio/mic and both USB 2.0 ports will always be functional. However, the USB 3.0 ports and the USB-C data port may not work when connecting devices with higher power requirements (e.g. SSDs, especially NVMe drives). In this case, the docking station may shut down. We recommend using the docking station with a power adapter connected to ensure that all ports are used and that maximum data transfer speeds are achieved. (The adapter is included in the package).

Note: If connected to an Android device, the dock will only work with the power adapter connected. (Adapter included).